<strike id="rrlvl"></strike>
<th id="rrlvl"><i id="rrlvl"></i></th>
<span id="rrlvl"><dl id="rrlvl"><ruby id="rrlvl"></ruby></dl></span><strike id="rrlvl"><dl id="rrlvl"></dl></strike><span id="rrlvl"><dl id="rrlvl"></dl></span>
<span id="rrlvl"></span>
<span id="rrlvl"><dl id="rrlvl"><ruby id="rrlvl"></ruby></dl></span>
<strike id="rrlvl"><i id="rrlvl"><del id="rrlvl"></del></i></strike>
<strike id="rrlvl"></strike>
<strike id="rrlvl"></strike>
<span id="rrlvl"></span>
<strike id="rrlvl"></strike>
<strike id="rrlvl"></strike>
Top
Language:
Products
Share:
HCZ multi-turn electric device

Overviewmodel Technical Parameters

1、Overview

03.jpg

Multi-turn valve electric actuator, commonly known as HCZ type. Suitable  for valves that open and close parts to make linear motion, such as  gate valves, globe valves, diaphragm valves, gates, water gate valves,  etc. Used for valve opening, closing or adjustment. It is an indispensable drive for remote control, centralized control and automatic control of valves. They are full-featured, reliable performance, advanced control systems, small size, light weight, easy to use and maintain.
Widely used in electricity, metallurgy, petroleum, chemical, paper, sewage treatment and other industries.
Multi-turn  electric actuators include: outdoor type, explosion-proof type,  integral type, integral adjustment type, flameproof integral type, and  flame proof integral adjustment type. According to the connection type, it is also divided into a torque type and a thrust type.
The  performance of this product complies with the requirements of  JB/T8528-1997 "Technical Conditions for Ordinary Type Valve Actuators". The flameproof performance complies with GB3836.1-2000 "Electrical  Equipment for Explosive Gas Environments Part 1: General Requirements",  GB 3836.2-2000 "Electrical Equipment for Explosive Gas Environments Part  2: Flameproof Type "d"" and JB/T8529-1997 "flameproof valve electric device technical conditions" provisions. And  by the national explosion-proof electrical product quality supervision  and inspection testing center certification, obtained a full range of  explosion-proof certification. Approved  by the General Administration of Quality Supervision, Inspection and  Quarantine of the People's Republic of China, it has obtained a national  industrial product production permit.

2、Model representation

b.png

Model Example:
1. HCZ30I-18/50W: It means that the electric actuator is multi-turn,  output torque is 300N·m (30kgf·m), power station type interface, output  rotation speed is 18r/min, maximum rotation number is 50, outdoor type.
2. HCZ45T-24/120BS: Said electric actuator is multi-turn, with manual  secondary deceleration device, output torque 450N · m (45kgf · m),  thrust type interface, output speed 24 r/min, maximum rotation number  120 , Flameproof type.
3. HCZ120-24/80T: It means that the electric actuator is multi-turn, the  output torque is 1200N·m (120kgf·m), the output speed is 24 r/min, the  maximum number of turns is 80 turns, and the overall adjustment type.

3、Working environment and main technical parameters

1. Power Supply: Conventional: Single-phase 220V, Three-phase 380V, Remote DC24V (50Hz)
    Special: single-phase 110V, three-phase 415V, 660V, (50Hz, 60 Hz)
2. working environment
2.1 Ambient temperature: -20~+60°C (special order -60~+80°C).
2.2 Relative humidity: 95% (at 25°C).
2.3 Outdoor type used in non-flammable/explosive and non-corrosive media;
2.4  Flameproof products include dI and dIIBT4. dI is applicable to  non-digging working face of coal mines; dIIBT4 is used in factories, and  is applicable to explosive gas mixtures with environment of IIA and IIB  T1~T4. (See GB3836.1 for details)
2.5 degree of protection: outdoor type and explosion-proof type is IP55, IP65, IP67.
3. Work system: 10 minutes for short (15-60 minutes for special orders).
4. model specifications and main performance parameters are shown in Table 1.

       Table 1

specifications

Torque(N·m)

thrust(KN)

Maximum stem diameter

(mm)

Manual speed ratio

Output speed(r/min)

Motor Power(KW)

Electric current(A)

reference weight

(Kg)

HCZ5

50

20

28

1:1

12/36

0.12/0.18/0.18

0.57/0.83

28

HCZ10

100

40

28

1:1

18/36

0.25/0.37

1.03/1.38

45

HCZ15

150

40

28

1:1

18/36

0.37/0.55

1.38/2.2

46

HCZ20

200

100

40

1:1

18/36

0.37/0.75

1.38/2.62

56

HCZ30

300

100

40

1:1

18/36

0.55/1.1

2.2/4

58

HCZ45

450

150

48

1:1/20:1
OR20:1

24/36

1.1/1.5

4/4.12

110

HCZ60

600

150

48

1:1/20:1
OR20:1

24/36

1.5/2.2

4.12/5.25

112

HCZ90

900

200

60

1:1/25:1
OR25:1

24/36

2.2/3

5.25/7.9

140

HCZ120

1200

200

60

1:1/25:1
OR25:1

24/36

3/4

7.9/8.87

142

HCZ180

1800

325

70

22.5:1

18/36

4/7.5

8.87/15.6

250

HCZ250

2500

325

70

22.5:1

18/36

5.5/10

12.05/20.5

255

HCZ350

3500

700

80

20:1

18/24

7.5/10

15.6/20.5

330

HCZ500

5000

700

80

20:1

18/24

10/15

20.5/26.6

350

Note: If the user needs, the factory can provide other speed: 12/18/24/30/36/42/48/60 (r/min)
Routine  supply according to the three rows of counters, such as the large  number of circling instructions when ordering, according to the four-row counter supply.

悠悠色精彩视频在线观看